Sweating is one of our body’s ways to remove toxins. Hence, to achieve that, people are investing their time to do sports or anything which results in sweats. Sauna is one of those ways. Fundamentally, sauna is a room designed to let the bathers perspire.
Therefore, to make that happens, a system with steaming and heating equipment is applied. You may want to have your sauna at home, located in your basement.
That is possible to make, but how to build a sauna in your basement? Read this information below to know how to turn your dusty basement into a sauna.
Table of Contents
Pros and Cons Sauna in Your Basement
First of all, let’s agree that all things have advantages and disadvantages. Below are the two sides of building a sauna in your basement.
Of course, it is about the use of the sauna itself. Healthy room removes body ache after a hectic day, as well as removing toxins. Enjoying the sauna moment with family will increase the bond as well.
You might wonder how much does building a sauna in basement cost on average. Well, it will cost around $3,000-$6,000. But, that depends on the materials used and the room’s width as well. Not even including the maintenance cost.
- Chances of damage
Not only about those molds and other creatures caused by the steam, chances of electric short circuit may happen. Therefore, a good planning, as well as a good implementation, should be done.
How to Build a Sauna in Your Basement
Next, the information below will answer ‘how to build a sauna in your basement?’ question. There are five steps of how to make a sauna at home.
A fundamental thing to do for anything: planning. Carefully plan the building as well as the materials used and the measurements. Determine which area should be used to build the sauna. As a recommendation, locate the sauna in the corner. As you have two walls already, that’ll cost less for the materials.
- Frame the walls
After buying the materials needed, it’s time to frame the walls. Just build the walls, for this step. Remember to give a decent space of four inches between the sauna wall and the basement wall. Also, put your door by giving four inches of space between the basement floor and the door’s bottom edge.
- Providing the power lines
Regarding the power lines, you need to consider the sauna room width: for a small sauna, a 120-volt heater. For a larger sauna, you can use the 240-volt heater.
In this step, you can install the power lines as well. Consider the position of the water pipes, as the water intrusion in the power lines can cause short circuits.
- Installing the sauna walls
Now time to put on the walls. As a recommendation, use cedar wood for interior walls as the wood can retain the heat.
- Installing the heater
As the last step, you can place your heater for the sauna. You can place it in the middle of the room or in a corner to provide even heat circulation.
Those are the steps on how to build a sauna in your basement. Building a sauna can be a DIY project, but if you are bothered to do it, have a professional to create it. That means less-hassle to have, but more budgeting to plan.