The methods on how to reset Samsung washer are sought by a lot of people who own the washing machine. Indeed, even though Samsung is an advanced brand for home appliances, sometimes errors happen to their products, including the washing machine.
When your Samsung washer at home is displaying error codes and restarting the machine is a must, these are the ways to do that.
See Also : Water Heater Making Noise – What are they?
Table of Contents
How to Reset Samsung Washer Top Load
When your washer is the one with top load, usually the error codes that will appear on the machine are including the LE and dc. The LE error code indicates that the water level in the washing machine is not properly reached.
The dc error code indicates that there is something wrong with the load that makes the machine won’t spin. Here are the methods to resolve and restart the machine.
1. Check the Water Supply Valves
The first thing you have to do in this how to reset Samsung washer method, you need to check the water supply valves. This step is important to make sure that the source of LE error code won’t happen anymore. Make sure that the water supply valves are fully and properly opened so that water level can be reached properly by the machine.
2. Check the Position of the Load
After that, you need to change the position the load. This step must be done so that the source of the dc error code is solved. Make sure that the load is being fed to the machine evenly. When you are done, you can move to the next step, which is the restarting step.
3. Restart the Machine
To restart the machine, you need to turn the power switch off and back on again after several minutes. Then, restore the power of the washer and press power button. Now, your washer can be used normally again.
How to Reset Samsung Washer Front Load
Just like the top load washer, you can also restart the front load Samsung washer. The error codes that usually appear on this kind of washer are dS, FL and nd. dS code indicates that the door on the front was opened when the machine is running.
FL is the code to indicate that the washing machine cannot lock the door properly. The code nd shows that the washer is failed to drain water properly. To get rid of those error codes and restart the washer, here are the steps:
1. Check the Washer Door
In this how to reset Samsung washer method, you have to check the washer door first. It is done to make sure that the error code dS and FL won’t happen anymore. Make sure that the door is fully locked and properly clicked.
2. Check the Drain Hose
To reset Samsung washer nd code or the one indicating errors on the water drainage, you need to check on the drain hose first. Make sure that the hose is not clogged or kinked. If anything blocks the hose, take it off and remove the thing clogging the hose.
3. Restart the Machine
Now restart the machine. The method is exactly the same as the one for the top load washer explained previously.
Those are some of the best ways to restart your Samsung washer. By doing so, you can basically resolve the problem without having to contact a technician.
Make sure you do understand the basic problem of the washing machine or the error codes that appear on the display. Therefore, you will no longer get confused about how to reset Samsung washer as you know exactly what to do.