How to Reset Whirlpool Cabrio Washer Quickly

1 min read

how to reset whirlpool cabrio washer

Understand the Whirlpool Cabrio Washer Troubleshooting Instructions to Reset Yours

A load of laundry needs to be done, but your Whirlpool washer does not work. But, when you consider buying a brand new one, it may also have the same problems. The Whirlpool Cabrio washer won’t turn on if you do not follow the correct procedure.

Know the reason why the Whirpool Cabrio washer does not work. Chances are the motor went on an error code, there is a power spike or interruption in power, and it can be because of the unbalanced load.

You also need to know which model your Whirlpool is. Sometimes, a different model comes with a different solution.

how to reset whirlpool cabrio washer

There are several options to reset your Whirlpool Cabrio washer quickly.

Solution 1

Certain washers have a reset function. It will reset when the machine does not start. You can turn the knob, but ensure the power button is Off first. Choose the program and press the power button. You will find the washer is restarting.

Solution 2

The first step you need to do the washer recalibration is turning off the washer. Make sure the button does not point at Rinse, and you have emptied the Whirlpool Cabrio washer.

After that, turn the mode dial to Normal at the top. Then, turn the dial left (counter-clockwise). Next, turn it right (clockwise) three times, then turn it left and right. Do the process immediately!

When it goes well, the lights will come on, flash to the Rinse direction, and you can press the Start. The recalibration period may take a full hour, but it sometimes can take a few seconds.

Solution 3

If the first solution cannot help, there must be a problem with the parts. Consider replacing the lid sensor switch and go through the motor, tub drive, and pump.

They can be the cause of your Whirlpool does not start. You might find debris inside the pump that blocks the flow, or the motor burns out.

Solution 4

Do you think any of those methods above work? Luckily, the Whirpool touchscreen model offers diagnostic mode, so you can find out what the exact issue is.

Click the temperature, soil, and spin buttons in a row three times. After that, the screen will pop up with your codes in several seconds or even minutes.

Each code represents a different issue. For example, I1 is a power supply loss, which a power outage can cause, and the FE error code indicates the water level is too high because of a faulty valve or the machine was filled with water when it was turned off.

You can find out the washer error message online for further explanation.

Now, you know how to reset Whirlpool Cabrio washer touch screen or not. Some models require manual settings, but others may be caused by technical issues that can be solved instantly.

Therefore, get to know your washer model and the reason first before trying any provided solution.