If you see flashing letters or number in your Samsung washer, it means there is something goes wrong with your washer. But what kind of problem?
It might be some trivial issues that everyone is able to fix it, or it might be severe enough that a technician should be called. In order to find out the problem, it is crucial to run a Samsung washer diagnostic mode.
Table of Contents
Samsung Washer Diagnostic Mode
Before looking for the problem that might occur with the Samsung washer, always be sure to plug off the power source to the machine. Also, remember to turn off the water. But in order to run Samsung washer diagnostic code, water and power source should be hooking up to the unit.
It is highly recommended to always run the Samsung washer diagnostic mode before and after the washing machine has been currently installed or may be moved to a new place. It only takes three to five minutes to run the diagnostic mode.
Running a diagnostic code can also be used to detect issues that your Samsung washing machine might have. Usually, there will be numbers or letters flashing in the display, indicating that the device has a problem.
Some customers might have no idea to know the meaning of those flashing error codes, much less how to fix Samsung washing machine. But, there are several issues that actually do not require a professional technician and is able to fix by yourself.
The first way to examine the problem is by running a Samsung washer diagnostic mode. This process does not need any equipment. But Samsung has two types of washing machines that might require a different approach of running diagnostic code: Samsung top load and front load.
Samsung Top Load Washer Diagnostic Mode
If your Samsung top load washer is not working properly or there are error codes on display, there is a way to troubleshoot the device, such as entering a Samsung washer diagnostic mode. There is no equipment required in order to conduct this diagnostic mode.
Diagnostic mode is done to access the original diagnostic codes (service technicians reference codes). To enter diagnostic mode, follow the tutorials below:
- Turn on the device.
- Continuously press the END/DELAY key until the number 17 appears on the screen.
- Press and hold the START key for about 7 up to 10 seconds.
- If there are AS codes on the screen, it shows that the Samsung top load washer is in the diagnostic mode.
Samsung Front Load Washer Diagnostic Mode
Error codes in the Samsung washing machine are something inevitable. In some cases, putting the device into diagnostic mode is a must thing to do. By using this mode, you will know what kind of error codes that have occurred.
Besides, it does not require any equipment at all. But, the device should be hooking up to the power source.
Below are the tutorials to enter diagnostic mode on Samsung front load washer:
- Press the SIGNAL and the EXTRA RINSE buttons altogether.
- Press the SPIN key until the letter D appears on the screen panel.
- Switch the dial from left to right or vice versa. After a second, the display panel will show the recently occurred error codes.
Every Samsung washing machine actually always comes with a guide book. This presence of this book is vital to show what to do if there is something wrong with the device, such as flashing numbers or letters, the device is not starting, not able to drain the water, etc.
However, such problems are too complicated, and some people prefer calling a technician rather than fixing it by themselves. However, what if it’s just a simple problem?
To find out the issue, try to enter the Samsung washer diagnostic mode first by following the tutorials above before deciding the next step needs to be done.