How to Hang a Ceiling Fan without a Stud and Do It Yourself
Table of Contents
Ceiling fans help keep your home cool but hanging a fan yourself can be challenging, especially when you do it for the first time. To help you start, this article will cover how to hang a ceiling fan without a stud.
Prepare the Required Supplies
To help you get prepared with the installation process, gather the tools you need first. They are:
- Wire cutters
- Brace box
After that, lift the circuit breaker at the electrical box and make sure you turn off the power supply.
Pick Where You Will Hang the Ceiling Fan
Please choose a location to install the fan because it relates to the power supply. You may have an existing fan before, and it will make the installation easier. You only need to disassemble the fixture and remove the fixtures. If you find the electrical box is already installed, you are lucky.
However, there is an option where you need to start a new fan installation. Thus, create a new wiring route through the attic access. If you cannot access it, create a small hole on the drywall to install the wiring.
Install the Electrical Box
There are several steps needed before hanging the ceiling fan
- Ensure the electrical box is mounted to a ceiling joist. Do you find the ceiling joist is not accessible? Use a brace box that connects the two ceiling joists and supports the weight of your fan.
- Slip the brace to the ceiling, place it between the joists through the hole, and then secure it. Install the U-bolt assembly to the center of the hole.
- Punch out the openings in the electrical box and feed the wires from the ceiling.
Install the wall switch, which is going to control the ceiling fan. Use fish tape to pull brand new wiring through the new fan and the walls.
Assemble the Fan
Assemble the down rod in the canopy according to the instructions. Set the wires through the down rod, then tighten all the set screws. The down rod can be held onto the motor using a metal bolt if you do not have a stud.
Now, raise the entire fan assembly to the ceiling mounting plate and seat the bulb into the socket. After that, connect the copper wire to the green ground wires on the fan base, then connect the white meter wires. Carefully push the wires up into the electrical box and cover it with the canopy.
Finally, attach the fan blades one by one to the assembly. Install the bulbs, then turn the power back on and make sure your ceiling fan operates properly.
After reading the article, you know how to mount the ceiling fan directly to the joist step-by-step. The installation’s success depends on the homeowner’s skill, so carefully read the guidelines and avoid any faulty wiring. If you are comfortable with the process, you can do it yourself. Yet, you can always contact the installation professionals to help you.