White Rodgers thermostat blinking snowflake is a problem that gets experienced by homeowners pretty frequently. When it comes to the thermostat, the brand White Rodgers cannot be forgotten.
This brand is one of the most famous brands when it comes to equipment. How to remove the blinking snowflake problem? The answer will be shown down below.
White Rodgers Thermostat Blinking Snowflake Troubleshooting
Table of Contents
Here is the step-by-step instruction to follow to solve the White Rodgers thermostat blinking snowflake problem. If this solution does not work, there must be something wrong with the thermostat that cannot be solved manually.
You will have to call White Rodgers technicians to get rid of the problem and not damage the thermostat even further.
1. Switch System to Cool
Before doing anything, you need to understand what it means when your thermostat has a snowflake. It means that your thermostat has a cool mode. It allows the tool to cool down the temperature of the room.
The first thing to troubleshoot this problem is actually to turn the thermostat to cool mode. When the cool mode is on, the snowflake icon should appear, but now it is already blinking, and you need to solve the problem,
2. Lower the SetPoint
The next step here is to set the temperature point. To make sure that the snowflake icon is no longer flashing or blinking, you need to make sure that the thermostat is set lower than the room’s actual temperature or area.
You will have to measure it using another tool and use it as the reference to set the thermostat’s temperature lower than that.
3. Wait for Click Sound
After the temperature is being set, you should hear a click sound. It is like a soft click sound, almost like a ticking sound. When it does sound like that, it means that the thermostat is actually working properly, and it has no problem related to the performance.
If the click sound is nowhere to be heard, you need to reset the temperature setting. Make sure it is on cool mode and lower than the actual temperature.
4. Restart the Thermostat
Now it is time to restart the thermostat. After the restart, no indicators should be blinking at all. If there is still an icon flashing, like White Rodgers thermostat flashing flame and snowflake, it means the whole troubleshooting does not work.
On this thermostat of this brand, the restart can be done by pressing three buttons at the same time: UP button, DOWN button, and TIME button. Press them all together at one time, and the thermostat will get automatically restarted.
After following the instruction above, your thermostat should work properly without the snowflake icon flashing. The cause of the problem is basically because the delay mode prevents the compressor from being damaged.
If the solution does not work, the compressor is probably already damaged, and you need professional hands to solve the White Rodgers thermostat blinking snowflake problem.