Honeywell thermostat flashing cool on is one of the most common problems to encounter when you have the thermostat. You do need a thermostat inside of the house to maintain its temperature.
You can adjust the temperature of the house from warm to cool, depending on your preference. However, what if your Honeywell thermostat keeps blinking all the time? Read more about it down below.
Honeywell Thermostat Flashing Cool On
The cooling delay system probably causes the Honeywell thermostat flashing cool on. Most Honeywell thermostat has a cooling delay feature, and this one is to postpone the cooling air from oozing out for several minutes.
Of course, when the battery is low, something will blink on the thermostat, usually the cooling indicator. It is usually pretty common for the Honeywell thermostat to be flashing cool on during the low battery stage, which is the first thing you should check.
Make sure the battery is still enough to power the thermostat. If they are not, prepare a new coil and a screwdriver, and then start changing the battery as soon as you can.
Thermostat Flashing Cool On After Changing Batteries
Even after changing the battery, you can still encounter the problem of the thermostat flashing. How is this possible? Probably it is related to the program of the thermostat.
To avoid the blinking problem, you need to follow the suggestions below. It will help you figure out the solution to the blinking cool indicators on the thermostat.
When the Honeywell thermostat flashes cool on after changing batteries and bothers you a lot, you need to restart the thermostat. How to do that? Easy! You have to turn the thermostat off and then take away the battery. Wait for 10 minutes, and then put the battery back on. Then, try turning on the thermostat again, and the blinking should be gone by now.
Reprogram the Thermostat
If the Honeywell thermostat cool on is flashing even after you restart it, the thermostat may have a problem with the program. Take a look at the automatic date and clock. When they are not synchronized, they may cause problems like blinking. Make sure you adjust the date, the clock, and the system well to avoid this blinking problem.
How to Fix
Everyone owning a Honeywell thermostat and using one at home should know how to fix this blinking problem. Honeywell thermostat flashing cool on, and other problems can be solved using simple solutions.
Read more about it below, and you can figure things out and eventually solve the problem with the thermostat.
Count the Blinking Flash
The first thing you will have to do to fix the thermostat is counting the blinking flash. It will indicate the problem the right way. According to Honeywell, thermostat flashing cool on how to fix the solution. When the blink is around ten to 15 times, it may indicate that something is off with the battery. It would be best if you changed it immediately.
Determine the Problems
After counting the blink, you can determine the problem as soon as possible. If the problem is with the battery, you can solve it immediately. However, if the problem is with its settings and system, you need to ensure that you have the instruction as your guidance and use it to fix the problem immediately.
Call a Technicians
The last thing you want to do here is to call a technician. Sometimes, the blinking problem is caused by a technical error in the system and electrical circuit. You should not do something on your own, and only a professional knows what to do. Leave the problem to them instead of doing it all on your own.
Those are the easy ways to solve the blinking problems. The first and only thing you should maintain in your mind is not to panic. Even though the thermostat is important and has a blinking problem, you should keep it calm and figure out the issue, including the Honeywell thermostat flashing cool on the problem. If you can’t solve it, call a professional technician immediately.