When you are looking for tutorials on how to paint a chain-link fence, you need this information here. Painting a chain-link fence is not something to take lightly. You need to do so many tools, especially when the fence is an old, rusty one.
Learn more about painting the fence, whether it is a relatively new fence or a rusty fence.
How to Paint a Chain Link Fence
When your chain link fence is a brand new one or one that has just been around less than a year, the method to paint a chain link fence can be found here. It allows you to keep the fence looking good and pretty to the eyes.
Here are the steps to take:
- Prepare the Tools and Materials
There are several things that you have to prepare. Surely you will need some paints, a brush, a long-napped roller, a grass trimmer, a flat container, and a piece of cardboard. They are all needed to complete this project.
- Trim/Cut the Grass
Next, prepare the surrounding area of the fence by trimming or cutting the grass. Use a grass trimmer to clean up the grass or any vegetation growing around and on the fence. Make sure they are all cleaned up entirely before starting painting.
- Paint the Fence
When you get asked about spray or roll chain link fence, the answer is quite simple: roller. Yes, you need a roller to paint the fence better. Roller offers better control and coverings compared to spray. Paint the body of the fence using a roller dipped in the paint.
Do it slowly but constantly to avoid any extreme dripping, and then let the paint dry completely.
Read also: How to Remove Paint from Vinyl Siding Easily
How to Paint a Rusty Chain Link Fence
Things will get even more complicated when you have to paint an old, rusty chain-link fence. Of course, the tutorial on how to paint a chain link fence will be slightly different because a rusty surface cannot just be painted right away.
These are the steps to take when doing so:
- Prepare the Tools and Materials
The tools and materials are almost the same as those you need to paint a new chain link fence. However, the cost to paint a chain link fence in a rusty condition will be higher as you need extra materials such as rust inhibitor primer and oil-based paint as the main material to paint the fence.
- Scrape and Apply Rust Inhibitor Primer
There must be rust left on the surface of the fence. Use a scraper to chip any rusty flakes off the fence and clean the surface. It prepares the surface to paint.
Then, apply the rust inhibitor primer. It will clean up the rust residue entirely. Just make sure to leave the fence until it is completely dried before applying paint to them.
- Apply Oil-Based Paint
Start painting from the post. The post of the fence is usually smaller in size, and it will be hard to use a roller. This is why for the post, you need a regular paintbrush. Use them to slowly apply a thin layer of paint on the post. Then, use a roller to apply the oil-based paint to the rest of the fence.
Considering the chain link fence is usually large, you need to ensure the job is done way in advance, as it may take several days to complete.
By understanding how to paint a chain-link fence, giving the fence some colors and personalities can be done very easily.