It is pretty uncommon for a bathtub won’t drain not clogged. The drain was usually clogged from all the excess hair and scum. If you’re sure your bathtub drainage isn’t clogged, what might be the reason?
Slow Draining Tub Not Clogged
Some weeks ago, my tub drained so slowly. My tub drains slowly, and probably the reason yours too can be because of a clog. In this case, you can use baking soda and vinegar, a natural alternative to remove the clog inside your pipe. You can also use a commercial clog remover, a plunger, a plumber’s snake, or remove the drain stopper to check it out.
However, if after you check it and the clog isn’t the reason why your bathtub won’t dry, the problem with your drainage might be more complicated.
Two possible reasons are why your bathtub won’t drain if not clogged. Either there is a problem with your built-in stopper or an issue farther down your pipeline.
How Do You Fix This?
If your bathtub won’t drain and it’s not due to a visible clog, there could be a few reasons for the problem. Here are some steps you can take to troubleshoot and fix the issue:
Check the Drain Stopper:
- Remove the drain stopper and clean it. Hair and soap scum can accumulate around the stopper, hindering water flow.
Use a Plunger:
- You can use a plunger if the clog is deeper in the pipes. Fill the tub with enough water to cover the plunger, then place the plunger over the drain and plunge vigorously.
Boiling Water:
- Boil a pot of water and pour it down the drain. Hot water can help dissolve soap and grease buildup.
Baking Soda and Vinegar:
- Pour a cup of baking soda down the drain, followed by a cup of vinegar. Let it sit for about 15 minutes, then flush with hot water. This can help break down organic matter.
Plumbing Snake or Auger:
- If the clog persists, you might need to use a plumbing snake or auger. Insert the snake into the drain and turn the handle to break up and remove the clog.
Check the Overflow Opening:
- Sometimes, the overflow opening can also accumulate debris. Check and clean it if necessary.
Remove and Clean the P-Trap:
- The P-trap is a U-shaped pipe under the sink. Place a bucket under the trap, unscrew it, and clean out any debris. Be prepared for some water to spill out when you remove the trap.
Enzyme Drain Cleaners:
- Consider using an enzyme-based drain cleaner. These cleaners contain natural enzymes that break down organic matter. Follow the instructions on the product.
Next, if you have repeatedly unclogged your bathtub but see no result, there is probably a problem. Your pipe may be damaged, leaked, or broken. If this happens, you should call in a professional plumber to give a thorough inspection.
Health Risk of Standing Water
When your bathtub doesn’t drain, standing water can pose a health risk to you and your family. Standing water is the perfect breeding ground for parasites, mold, and bacteria. If left for too long, it can attract insects and even rodents. Insects may lay eggs in the water and causing such a nuisance when they hatch, and become mosquitoes or flies themselves.
Read also: Solution For Water Heater Making Noise
Rodents such as rats, possums, and mice can spread disease through their waste. It can be even more dangerous in large numbers as they may even steal food, leaving bacteria and vermin in their wake.
That being said, you should fix your drainage as soon as possible when any problem arises. No one wanted to have malicious parasites in their home, and so standing water should be dealt with as soon as possible.
Read also: How to Solve Samsung Fridge Temperature Blinking Problem ?
Check your drainage and use a plumber. If it doesn’t solve the problem, call a professional plumber immediately. A bathtub won’t drain not clogged. It may look like a slight problem occurred once in ten years, but it is annoying and such a bother when you wash up. Moreover, leaving it as it is for a long time may risk your health and may even be dangerous.
